Welcome to the Ben Blinds blog! Today, we’ll be walking you through the process of programming your AM25 motor for your blinds. Whether you’re installing new blinds or just need to reprogram your existing ones, this detailed guide will help you set up your motorized blinds for optimal performance.
Understanding the AM25 Motor
The AM25 motor is a low-power dissipation DC motor, ideal for applications where energy efficiency is a priority. It can be powered by a built-in lithium battery, an external battery wand, or a solar panel. Its key features include energy-saving design, self-checking and correction of brake offset, electronic limit setting with six programmable positions, and protection against overloading and overcharging.
Key Features:
Energy Efficient:
The motor is designed to conserve power, making it suitable for use with solar panels or external battery packs.
Self-Checking
It automatically corrects brake offset to maintain optimal performance.
Programmable Limits:
You can set up to six stopping points, including two end limits and four intermediate positions.
Overload Protection:
Protects against damage from overcharging or low battery levels.
Long Battery Life:
A fully charged battery can last 4-6 months with daily operation.
Preparing for Installation and Programming
Before you start programming your AM25 motor, make sure you have thoroughly read the installation and programming instructions. Proper preparation can prevent damage to the motor or the shade and ensure a smooth setup process.
Initial Preparation:
Map Out the Installation:
Plan which channels and remotes will control each shade to reduce setup time.
Gather Necessary Tools and Controls:
Ensure you have all remotes, channels, and tools needed for programming.
Ensure Power is Supplied to the Motor:
Only supply power to the motor being programmed to avoid interference with other motors.
Safety Precautions:
Be Ready to Stop the Shade:
During programming, the shade will move continuously. Be prepared to stop the motor using the remote control to prevent damage.
Put Built-In Battery Motors to Sleep:
For motors with built-in batteries, put them to sleep during programming to avoid inadvertent interactions.
Programming the AM25 Motor
Step 1: Record a Channel to the Motor Memory
Select the Remote Control and Channel:
Choose the remote control and channel you wish to use.
Activate Programming Mode:
Press and hold the program button on the motor head for 1 second until the motor beeps and jogs once.
Assign the Channel:
Within 10 seconds, press the “Up” button on the selected remote. The motor should jog once, confirming the channel assignment.
Step 2: Check and Adjust Motor Direction
Verify Motor Direction:
Ensure that pressing the “Up” button moves the shade up and the “Down” button moves it down.
Change Direction if Necessary:
If the motor operates in the opposite direction, press and hold the “Stop” button for 5 seconds until the motor jogs. Then press the “Down” button to confirm the direction change.
Step 3: Set Lower and Upper Shade Limits
Enter Limit Setting Mode:
Press and hold the program button on the remote for 1 second until the shade jogs.
Set Lower Limit:
Move the shade to the desired lower limit position using the remote. Press and hold the program button for 1 second to confirm.
Set Upper Limit:
Move the shade to the desired upper limit position. Again, press and hold the program button for 1 second to confirm.
Intermediate Stopping Positions
1. Move Shade to Desired Position
Use the remote to move the shade to the desired intermediate position.
2. Program Intermediate Position:
Press and hold the program button on the remote for 1 second. Repeat this process to set up to four intermediate positions.
Adjusting and Deleting Stopping Points
1. Adjust Stopping Points:
Move the shade to the current stopping point, press and hold the program button for 1 second, adjust to the new position, and press the program button again to save.
2. Delete Stopping Points:
Press and hold the program button on the remote for 1 second. Repeat this process to set up to four intermediate positions.
Adding or Deleting Remote Controls or Channels
1. Add a Remote Control/Channel:
Press and hold the “Stop” button on the current remote for 5 seconds. Then, select the new remote/channel and press the “Up” button.
2. Delete a Remote Control/Channel:
Select the remote/channel to be deleted, press and hold the “Stop” button for 5 seconds, then press and hold the program button for 1 second.
Resetting the Motor
1. Using the Motor Head:
Press the program button four times quickly, followed by a long press on the fifth time. The motor should jog twice to confirm the reset.
2. Using a Remote Control:
Press and hold the “Stop” button for 5 seconds, then within 10 seconds, press and hold the program button for 7 seconds until the motor jogs three times.
Troubleshooting Common Issues
If you encounter issues during programming or operation, consider the following troubleshooting steps:
1. Motor Does Not Run or Runs Slowly:
- Check for overloading or improper installation.
- Ensure the motor has not reached its limit.
- Recharge the battery if it is low.
2. Motor Fails to Respond to Remote:
- Ensure the motor is powered on.
- Verify the battery level of the remote and motor.
3. Motor Direction is Incorrect:
- Follow the steps in “Check and Adjust Motor Direction” to correct the direction
Programming your AM25 motor for your blinds is a straightforward process if you follow these detailed instructions. By carefully preparing and following each step, you can ensure your blinds operate smoothly and efficiently. Remember to keep your remote controls organized and ensure all motors are correctly programmed before moving on to the next.
At Ben Blinds, we’re committed to helping you get the most out of your motorized blinds. If you have any questions or need further assistance, don’t hesitate to contact our support team. Happy programming!
